All Aluminum Conductor

  • all aluminum conductor
  • All Aluminum Conductor
  • All Aluminum Conductor

All Aluminum Conductor (AAC)
Voltage: high voltage
Material: Aluminum Alloy 1350
Origin Place: China

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest

AAC Conductor, All Aluminum Conductor (DIN 48201)

AAC conductor is widely used in power transmission lines with various voltage levels.
Since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.


1. Specification:
All aluminum conductor (AAC)

2. Elative manufacturing standards:
DIN 48 201-5: All Aluminum Conductors

3. Applications:
Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.

4. Construction:
Aluminum 1350-H19 wires, concentrically stranded

Applicable Standard:
IEC61089, ASTM B231, AAC BS215

Service Performance

  1. The permissible long-time operating temperature for aerial conductor is 70oC.
  2. Under the circumstance that rare climate is occurring and ice coverage rate low in heavy ice area, the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
  3. When connecting conductors, the conductor beside the connecting tube can’t be prominent. Otherwise, the force on the operating conductors will be unbalanced. After connectors are install, the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
  4. Under installation, the arc downing stress of all the conductors should be the same. With in the permissible distance of crossing buildings or dropping to the ground, the stress can be 10-15% higher than regular stress.

Product Performance

  1. The electrical performance of AAC and ACSR is indicated in DCΩ/km(20oC).The resistivity of the hard aluminum wire for stranded wires is not greater than 28.264 nΩ. m of international standard value.
  2. The rated tensile strength of AAC is denoted with the result of total cross-section of all aluminum conductors multiplied by min. tensile of corresponding size specified in the standard for aluminum wire.
  3. The rated tensile strength of ACSR is denoted with sum of all aluminum conductors tensile strength and steels tensile strength.

a. Excellent electric and mechanical characteristics.
b. Good conductivity, Resistance chemical corrosion and heat-aging,environment stress.
c. Unit volume light, Simple in structure.
d. Convenient to use, especially for laying across

Our customers have covered more than 50 countries. Export regions include Europe, North America, North Africa, Middle East, Southeast Asia, etc.

We certificate by ISO 9001:2015,ISO 14001:2015,OHSAS 18001 ,CCC Certificate ,UL certificate and so on.

We provide seaworthy cable packing, wooden drum/wooden-steel drum/ steel drum and etc, cable length can be designed according to customer needs.

We have a complete quality control system, advanced laboratory equipment, to ensure that every batch of goods sent to customers meets the quality requirements. Meanwhile, we accept testing requirements from customers and third-party testing agencies.

cables testing

We believe that an excellent professional team is the best guarantee for quality service !

Your Name :

Your Email:

Leave a Reply

Your email address will not be published. Required fields are marked *

Choose language